Steering Pump Puller Installation Removeal Tool Applicable for GM and for Ford

• To use the tool, it is recommended to lubricate it before use.
  

• The threaded bolt should be placed in the center of the pulley with the half-moon clamp shells and lip retaining ring surrounding it. 

• Next, the center piece of the grabber nut with a die on top should be placed on top of the threaded bolt. The threaded stud in the center of the nut end should be firmly tightened with the tool, and then used to loosen and remove the pulley. 

• Finally, the tools should be stored safely in the included high-quality storage case once the job is complete, and the keywords to search for this tool are "power steering pulley puller" or "steering pump puller". 

• The application of this tool extends to Ford, GM, and Chrysler vehicles that are equipped with Saginaw, Thompson, and Ford C111 and C2 power steering pumps. 

• It is suitable for pulley hub diameters of 1 1/8 inches, 1 1/4 inches, 1 5/16 inches, and 1 3/8 inches, including 1988 and newer GM cars with 4 Quad engines, 1991 and newer GM minivans with 3.1 L and 3800 V-6 engines, and 1991 to current Ford 4.6l engines with metric axle.

1x Steering pump tensioner installation and removal tool set

Screw sizes: 5/8"-18 UNF, 5/8"-18 UNF,3/8"-16 UNC, 3/8"-16 UNC x M6 - 1.25mm

Bolt circle diameter in inches: 1-1/8, 1-1/4, 1-5/16, 1-3/8

1 carrying case for transport and storage

ENGINE TIMIGN TOOL KIT - 1 piece power steering pump pulley extractor installation tool (disconnecting tool, bushing, screw set)